A brief look at New Zealand’s solar market
Unlike most economies worldwide, New Zealand boasts of colossal renewable energy penetration. Currently, renewables account for 90% of the nation’s total energy consumption. Despite the high degree of renewable energy utilization, solar generation in New Zealand is still at its lowest.
The most recent solar capacity statistics reveal that New Zealand’s grid-connected solar energy stands at 159 Megawatts. This figure is pretty low, considering that the country’s solar potential is 11 Gigawatts. Nevertheless, things are looking up for New Zealand’s solar market due to new solar-centered initiatives.
In December 2020, the government of New Zealand launched a Green Investment finance facility worth US $69 million. Based on this development, forecast studies reveal that solar penetration could reach 9.3 % by 2050, up from 0.2% in 2020. Essentially, New Zealand could have an installed capacity of 300 Megawatts in 2025 and I.1 Gigawatts by 2030. Logically, many projects will have to be implemented to achieve these targets. This will generate opportunities for solar installers and professionals in New Zealand’s solar market.
New Zealand’s solar equipment supply capability
New Zealand has several solar equipment suppliers focusing on different equipment categories, including solar panels, solar water pumps, and charge controllers. Nevertheless, there is a big possibility that you will not find what you need, especially when dealing with large-scale projects. Still, there is a simple solution in such a scenario.
Solarfeeds.com grants you access to 50 solar equipment categories. Kindly visit our inquiry page and place a request. You will receive free quotes in record-breaking time. Also, you don’t have to worry about importation modalities because New Zealand boasts of a healthy network of ports and logistical support frameworks.
Ground Fault Protection Devices
What are Ground Fault Protection Devices and Detectors?
Ground Fault Protection Devices and Detectors help people to rectify the faults that arise from ground faults. Ground faults are nothing but the inability of the grounding system to pass the extra current to earth.
Earthing is a common practice for all types of electrical systems. Earthing or grounding connects a conductor to the earth and protects the system from damage due to high current or voltage.
In large Solar arrays, grounding faults cannot be manually detected to their large size. Therefore devices and detectors are used to get warnings or alarms whenever there is a discontinuity in the grounding conductor. Timely detection of faults can save costly equipment and protect people from accidents.
Where are Ground Fault Protection Devices and Detectors used?
Ground Fault Protection Devices and Detectors are used in electric systems like Solar Plants with Solar panels or arrays.
Advantages of Ground Fault Protection Devices and Detectors
- Can be applied to single and multi controllers.
- Protects active devices like batteries and transformers.
- Used in place of fuses
- Complete isolation of the Solar Arrays or panels happens upon fault detection.
- Ground faults are easily traced
- Minimal battery power is required
- Compatibility with all kinds of PV arrays
How do Ground Fault Protection Devices and Detectors work?
Ground Fault Protection Detectors measure the voltage between the terminal and the ground potential. Based on the reading the fault is located. If the voltage is high in the grounded portion then the Ground Fault Protection Device acts as a circuit breaker to protect any hazard from happening.
What are some branded Ground Fault Protection Devices and Detectors?
GE is one of the biggest names in electrical instrumentation. GE makes grounding systems to protect the system from high current and voltage damages. Some other brands are
- NK Technologies
- Rockwell Automation
- Steven Engineering
- American Sun Components
- North Coast Electric Co.