Netherlands
Solar Market Outlook in the Netherlands
The Netherlands solar power market is one of the fastest growing solar markets in Europe. In 2020, it managed to deploy 2.93 GW of solar capacity and it marks a growth rate of 40%. This data pushed the cumulative figure of the country’s solar market to 10.11 GW. Since 2017, there has been consistent growth for the Dutch solar power market.
Majority of the solar power installations in 2020 were in the residential segment but the industrial and large-scale installations had their fair share, too.
Despite failing to meet its EU 2020 renewable energy target of 14% (the Netherlands is only 12.5% by 2020), the country is well on its way to making solar as its primary renewable energy source.
The Dutch government is promoting the solar market growth through national SDE+ auctions to provide greater financial incentives to investors. They are also making it happen through the Power Purchase Agreements.
The projected solar installation capacity in the Netherlands by 2050 is at 38 GW to 125 GW.
Solar Energy Equipment Supply Capacity in the Netherlands
Solar panel companies are quite abundant in the Netherlands. There is also a growing number of renewable energy manufacturers in the country.
The Netherlands also has easy access to solar energy suppliers for the residential and industrial segments.
Top 8 Major Seaports & Logistics in the Netherlands
The Netherlands is one of the most important and largest seaports in Europe. It is also accessible to a wide range of logistics and passenger ports. This makes it easy to procure solar power equipment for those who wish to shift to renewable energy sources.
The top logistics and seaports in the Netherlands include the following ports: Port of Amsterdam, Port of Rotterdam, Port of Alkmaar, Port of Den Helder, Port of Breskens, Port of Dordrecht, Port of Harlingen, and Port of Moerdijk.
Charge Controllers
Wholesale Solar Charge Controllers Suppliers
Sometimes called “Solar Regulators“, a solar charge controller is basically a device that controls voltage or current that charges the battery so that electric cells do not get overcharged. A charge controller controls the voltage and current coming from the solar panels and move to the electric cell.
Roughly, 12V boards or panels generate around 16 to 20V, and without any regulation, the voltage will damage the electric cells through overcharging. Usually, electric storage devices need nearly 14 to 14.5V to get fully charged. The solar charge controllers are available in different features, sizes, and costs. The range of charge controllers starts from 4.5A, 60 to 80A.
Why Charge Controllers for PV Systems?
- To protect the battery (12V) from overcharging
- To minimize system maintenance and increase the battery life
- To indicate auto-charge
- To monitor the reverse current flow.
Solar power systems mostly use 12V batteries. Solar panels can carry more voltage than required to charge the battery. Charge controllers can keep the voltage of the electronic storage at the optimum level.
This way, solar systems work at their best efficiency level. By running higher voltage in the wires from the solar panels to the charge controller, power transmission through the wires is reduced.
Types of Solar Charge Controllers
There are three main types of solar charge controllers:
- Simple 1 or 2 Controls: This type of charge controller has shunt transistors to control the voltage in one or two steps. The controller regulates the voltage in the solar panel after reaching a certain point.
- Maximum Power Point Tracking (MPPT): The MPPT solar charge controller identifies the best working voltage and amperage of solar panels and matches that with the electric cell bank. The outcome is additional 10-30% more power output than other controllers.
- PWM (Pulse Width Modulated): These are the conventional types of charge controllers and are currently considered as the industry standard.
Get the Best Quality Solar Regulator from SolarFeeds
As a multiple wholesale vendor eCommerce marketplaces, our website lists a wide range of reputable brands of Solar PWM/MPPT Charge Controllers from manufacturers. These charge controllers perfectly work as electronic DC-to-DC converters that optimize the match between the solar array (PV panels), the battery bank, or the utility grid.
The charge controllers convert a higher voltage DC output from solar panels into the lower voltage needed to charge batteries.
You can also buy wholesale multifunction solar charge controllers, which are based on Microcontroller technology. These multifunction solar charge controllers have become popular for their excellent performances. They are used to convert regular UPS/inverters into a Solar power Conditioning Unit (PCU).
Check out our website for various wholesale solar charge controller manufacturers, and buy them in bulk at a low cost.
You can get long-term benefits from buying wholesale solar charge controllers directly from manufacturers for expanding your business and increasing revenues. Drop us an email with your questions at [email protected]
