Solar Market Outlook in the Netherlands
The Netherlands solar power market is one of the fastest growing solar markets in Europe. In 2020, it managed to deploy 2.93 GW of solar capacity and it marks a growth rate of 40%. This data pushed the cumulative figure of the country’s solar market to 10.11 GW. Since 2017, there has been consistent growth for the Dutch solar power market.
Majority of the solar power installations in 2020 were in the residential segment but the industrial and large-scale installations had their fair share, too.
Despite failing to meet its EU 2020 renewable energy target of 14% (the Netherlands is only 12.5% by 2020), the country is well on its way to making solar as its primary renewable energy source.
The Dutch government is promoting the solar market growth through national SDE+ auctions to provide greater financial incentives to investors. They are also making it happen through the Power Purchase Agreements.
The projected solar installation capacity in the Netherlands by 2050 is at 38 GW to 125 GW.
Solar Energy Equipment Supply Capacity in the Netherlands
Solar panel companies are quite abundant in the Netherlands. There is also a growing number of renewable energy manufacturers in the country.
The Netherlands also has easy access to solar energy suppliers for the residential and industrial segments.
Top 8 Major Seaports & Logistics in the Netherlands
The Netherlands is one of the most important and largest seaports in Europe. It is also accessible to a wide range of logistics and passenger ports. This makes it easy to procure solar power equipment for those who wish to shift to renewable energy sources.
The top logistics and seaports in the Netherlands include the following ports: Port of Amsterdam, Port of Rotterdam, Port of Alkmaar, Port of Den Helder, Port of Breskens, Port of Dordrecht, Port of Harlingen, and Port of Moerdijk.
Ballasted Mounting Solar System
Ballasted Mounting Solar System
You may assume that installing a solar panel system is easy as some commercial ads say it is. But in reality, solar installers conduct a roof inspection beforehand to check if your roof is safe to install solar panels to avoid future conflict in the installation process. Note that, not all roofs can pass the test, as there are requirements to follow.
In today’s article, we will be discussing one of the ways to install your solar panel system on your roof.
What is Ballasted Mounting Solar System?
There are few ways to install a solar panel system on your house roof, the traditional way is directly attaching them to your home’s rafters. This common way needs cutting and putting holes into the roof to place the solar panels. Although most installers care to seal all those holes to avoid water leakage, it will eventually turn into trouble, as those sealers can break down sooner. That’s a real problem to be considered especially if you have a flat roof. It is one of the reasons why some homeowners choose ballasted mounting solar system installation.
Whereas, Ballasted mounting is a way of installing your solar panels on your roof without needing to place bolts on it to fix the panels. The ballast is usually heavy holding itself in place. Its weight distribution sometimes can be used as the ballast itself, but other installers use trays to receive concrete blocks. If you’re concern about those roof holes, this mounting system is ideal for you.
How to Install Ballasted Mounting Solar System?
Unlike the traditional one, Ballasted mounting does not require any holes to fix the solar panels on your roof. A ballasted mounting system offers various benefits of installing solar panels without causing damage to your home’s rafters. Generally, solar ballasts are not directly attached to roof rafters the way traditional solar panel installation works. Instead, concrete blocks or a solar racking system are used as based where the solar panels are placed directly on top and cemented to the surface.
Typically, after your installers inspect your roof, they will suggest the best way to install your solar panels so it is best to follow what your installers recommend than what you like.
What Kind of Roof Structure is Best for a Ballasted Mounting System?
Most architects design houses with low-slopped and flat roofs, particularly with a complex drainage system. However, this type of roof structure usually brings water leakage problems if small holes start to appear due to rust.
If you plan to install a solar power system with this type of roof structure, solar installers often suggest choosing the ballast mounting system as it can prevent damage to your roofs. With ballasted mounting, your roof will be free from expansion bolts or chemical bolts that usually damage your roof. To make it simpler, ballasted systems are preferable for homes with flat and low-slopped roofs.
Conclusion: Should You Install Ballast-Mounted Solar Panels?
Choosing the Ballasted mounting solar system is indeed a good way to install your solar panels. They are relatively easy to install, most importantly, they cannot damage your roof, retaining its great shape. However, you should pick this mounting system if your installers advised you because they surely know what’s best for your roof. Remember it is much suited to low-slopped and flat roofs than those high-slopped ones.