Status review of Indonesia’s solar market
Indonesia is a signatory to the UN Framework Convention on Climate Change (UNFCCC) and the Paris Climate Agreement. One would easily assume that the nation’s solar market is performing well, considering its government’s dedication to renewable energy. Unfortunately, Indonesia’s solar market has not lived up to its exponential potential.
The nation’s solar capacity stood at approximately 11.5% of the total energy production and supply at the end of 2020. Even though Indonesia’s solar market outlook is pretty bleak, there is hope for the future. A recent IRENA report reveals that the Indonesian market can attain a capacity of 47 Gigawatts by 2030.
IRENA’s report predicts that the Indonesian solar market is likely to grow at the utility-scale. This means that residential and commercial photovoltaic systems will substitute traditional power generation. If this report is anything to go by, there are many opportunities for solar installers and professionals in Indonesia.
Indonesia’s solar equipment production and supply aptitude
As I mentioned earlier, the Indonesian solar market has not realized its full potential. Even though the market is still young, it enjoys a substantial presence of local and foreign solar equipment producers and suppliers. The nation also boasts several sea ports and logistical infrastructure that allow you to import solar equipment if the need arises. It is wise to find a reliable partner that can provide everything you need at desirable prices and quality.
Since you are going through this post, you are in the right place. Solarfeeds is a one-stop marketplace for 50 categories of solar equipment. Reach out to us via our inquiry page rather than spending valuable time moving from place to place requesting quotes. We will respond swiftly because we understand that time is a valuable commodity.
Wholesale Solar Charge Controllers Suppliers
Sometimes called “Solar Regulators“, a solar charge controller is basically a device that controls voltage or current that charges the battery so that electric cells do not get overcharged. A charge controller controls the voltage and current coming from the solar panels and move to the electric cell.
Roughly, 12V boards or panels generate around 16 to 20V, and without any regulation, the voltage will damage the electric cells through overcharging. Usually, electric storage devices need nearly 14 to 14.5V to get fully charged. The solar charge controllers are available in different features, sizes, and costs. The range of charge controllers starts from 4.5A, 60 to 80A.
Why Charge Controllers for PV Systems?
- To protect the battery (12V) from overcharging
- To minimize system maintenance and increase the battery life
- To indicate auto-charge
- To monitor the reverse current flow.
Solar power systems mostly use 12V batteries. Solar panels can carry more voltage than required to charge the battery. Charge controllers can keep the voltage of the electronic storage at the optimum level.
This way, solar systems work at their best efficiency level. By running higher voltage in the wires from the solar panels to the charge controller, power transmission through the wires is reduced.
Types of Solar Charge Controllers
There are three main types of solar charge controllers:
- Simple 1 or 2 Controls: This type of charge controller has shunt transistors to control the voltage in one or two steps. The controller regulates the voltage in the solar panel after reaching a certain point.
- Maximum Power Point Tracking (MPPT): The MPPT solar charge controller identifies the best working voltage and amperage of solar panels and matches that with the electric cell bank. The outcome is additional 10-30% more power output than other controllers.
- PWM (Pulse Width Modulated): These are the conventional types of charge controllers and are currently considered as the industry standard.
Get the Best Quality Solar Regulator from SolarFeeds
As a multiple wholesale vendor eCommerce marketplaces, our website lists a wide range of reputable brands of Solar PWM/MPPT Charge Controllers from manufacturers. These charge controllers perfectly work as electronic DC-to-DC converters that optimize the match between the solar array (PV panels), the battery bank, or the utility grid.
The charge controllers convert a higher voltage DC output from solar panels into the lower voltage needed to charge batteries.
You can also buy wholesale multifunction solar charge controllers, which are based on Microcontroller technology. These multifunction solar charge controllers have become popular for their excellent performances. They are used to convert regular UPS/inverters into a Solar power Conditioning Unit (PCU).
Check out our website for various wholesale solar charge controller manufacturers, and buy them in bulk at a low cost.
You can get long-term benefits from buying wholesale solar charge controllers directly from manufacturers for expanding your business and increasing revenues. Drop us an email with your questions at [email protected]