Solar Market Outlook in France
The solar market in France is characterized by ambitious targets and innovative solutions. The country has been one of the major proponents of solar energy in Europe and this is made possible by the strong policies in place.
In 2020, France crossed the significant threshold capacity of 10 GW installed. This brings the country to its goal of 20.1 GW solar capacity by the year 2023. This goal is established alongside the Multi-Annual Energy Programme.
Despite the impact of the pandemic, the solar market in France remains steadfast in its commitment to become the primary source of renewable energy source. France was able to produce 7.6 TWh of solar from January to June 2021. This was a significant growth from the 6.8 TWh power that was produced in the same period of 2020.
The French Renewable Energy Trade Association continues to push the country’s solar market potential and it has received a lot of support from the French national government.
Solar Energy Manufacturers in France
There is no shortage of manufacturers and companies that are dedicated to providing technological and innovative solutions to more French households and commercial spaces. This gives the market massive growth potential.
The vast amount of options for solar energy manufacturers in France has contributed to a growth in the solar market that the country has not experienced before.
Ports and logistics in France
There are a wide array of major sea ports and logistic companies operating in France. This is good news for residential and commercial properties that are looking to switch to solar energy.
There are 10 major ports in France and Marseille Fos Port is the main maritime port. This port handles goods and passengers with an average traffic of 88 million tons.
Solar Product Manufacturers in France
The production of solar products continues to see tremendous growth over the past decade in France. There are several options for consumers and it’s not just limited to solar panel installations.
Solar manufacturing in France includes solar water heating components, photovoltaic systems, solar roofing systems, indoor solar cells, and more.
One of the major components of a solar panel system is the solar racking system or mount system. It is the foundation that holds your solar panels in place. Typically, they are used to attach solar PV modules to your property’s roof, open ground, or another flat surface near your property. When installing a solar panel system, proper installation should be observed to make a sturdy racking system. If you want to secure your PV panels and allow them to withstand the harsh weather and outside elements, choosing the right mounting products is needed.
You should also note that solar panel racking equipment is built with 3 main components, they are roof attachments, module clamps, and mounting rails. But for today’s article, we will highlight the roof attachment and its types.
What are Roof Attachments?
From the word itself “attachment”, the roof attachments act as the fasteners that hold the racking system in place and fix it to your roof. Usually, your solar installer will drill it into your roof securing the solar mounting system in place. The holes created by these drills will be complemented by ‘flashing’, which is either a plastic or metal shield. The flashing will be inserted between the roof shingles, preventing water leakages from escaping into the holes.
However, not all roof attachments are suited to all types of roofs. Note that each type of roof (clay tile roofs, metal roofs, and flat surface roofs) also has a different roof attachment.
Types of Roof Attachments
This type of roof attachment system is designed to be used on new or existing tile pitched roofs using a structural method. It is commonly available in Flat, S, and W-shaped retro tile profiles. Usually, it replaces one complete roof tile, instead of drilling, cutting, or grinding the roof tiles. It requires multiple fastener holes in the base plate to attach the solar array into the roof rafter regardless of the flashing alignment.
The Conduit Mount Tile bracket directly hooks onto the tile to lift the electrical conduit off the roof surface. This kind of mounting system prevents the wiring from overheating. The roof attachment is usually compatible with Flat, S, and W-shaped tiles. Like the tile mounting system, it does not require drilling or grinding the tile.
This roof attachment system is a stand-alone flashing that can be used with other third-party tile hooks. The flashing acts as a replacement to a complete tile, so there will be no cutting, drilling, or grinding of tiles needed. The flashing is available in three shapes that usually fit the most pitched roof slope tile profiles.
CorruSlide is designed to fit nearly any pitched slope corrugated metal roof profile. It uses an adjustable hinged mount that will be attached to the sides of the panel ridges, preventing water leakage from low roof areas.
SimpleSeal is engineered for solar installation on most pitched metal roofs. The roof attachment system has a cone-shaped EPDM rubber bushing that is ideal for the countersink of any compression bracket. The SimpleSeal bushing is compressed inside the bracket, fastened to the roof, and creates a watertight seal.
Not all roof attachment systems are ideal for all types of roof materials and structures. Some fit the sloping roof, others don’t. You also have to consider your roof type, if it is a comp shingle, corrugated metal, tile, membrane rolled comp, standing seam metal, etc., as it can affect the overall performance and durability of your solar racking system.