Solar Market Outlook in El Salvador
Despite being the smallest country in Central America, El Salvador is one of the strongest proponents of renewable energy production in the region. This is part of the government’s commitment to reduce emissions and to increase energy efficiency while utilizing the country’s tropical climate. The hot and humid weather, along with the high rate of sunshine per year, makes it the best location to utilize solar energy and other renewable energy sources. The average daily solar radiation in El Salvador is measured at 5 kWh/m2.
The National Energy Policy mandate in El Salvador has helped to boost its renewable energy production. Currently, it accounts for over 60% of the country’s energy production, although solar sources only contribute to 4% of that.
This is set to change in the coming years, though, as El Salvador is focused on increasing its solar PV installation capacity. They have helped increase PV generation capacity through auctions since 2014. Still, it cannot be denied that the solar market in El Salvador is still in the nascent stage and the government is looking at investment incentives and other policies to encourage development of solar PV.
Solar Energy Equipment Supply Capacity in El Salvador
There is currently a limited amount of domestic investments on solar generation plants in El Salvador. However, there are plenty of global suppliers and distributors that can be tapped at the moment for those looking to make solar installations.
Major Seaports & Logistics in El Salvador
The Port of Acajutla is the primary seaport in El Salvador that facilitates the handling and logistics of solar equipment and other goods (both import and export). This makes it convenient for anyone looking to order from top suppliers for solar installations.
In addition to this, there are other smaller ports like Port of La Union and Port of La Libertad
Wholesale Solar Charge Controllers Suppliers
Sometimes called “Solar Regulators“, a solar charge controller is basically a device that controls voltage or current that charges the battery so that electric cells do not get overcharged. A charge controller controls the voltage and current coming from the solar panels and move to the electric cell.
Roughly, 12V boards or panels generate around 16 to 20V, and without any regulation, the voltage will damage the electric cells through overcharging. Usually, electric storage devices need nearly 14 to 14.5V to get fully charged. The solar charge controllers are available in different features, sizes, and costs. The range of charge controllers starts from 4.5A, 60 to 80A.
Why Charge Controllers for PV Systems?
- To protect the battery (12V) from overcharging
- To minimize system maintenance and increase the battery life
- To indicate auto-charge
- To monitor the reverse current flow.
Solar power systems mostly use 12V batteries. Solar panels can carry more voltage than required to charge the battery. Charge controllers can keep the voltage of the electronic storage at the optimum level.
This way, solar systems work at their best efficiency level. By running higher voltage in the wires from the solar panels to the charge controller, power transmission through the wires is reduced.
Types of Solar Charge Controllers
There are three main types of solar charge controllers:
- Simple 1 or 2 Controls: This type of charge controller has shunt transistors to control the voltage in one or two steps. The controller regulates the voltage in the solar panel after reaching a certain point.
- Maximum Power Point Tracking (MPPT): The MPPT solar charge controller identifies the best working voltage and amperage of solar panels and matches that with the electric cell bank. The outcome is additional 10-30% more power output than other controllers.
- PWM (Pulse Width Modulated): These are the conventional types of charge controllers and are currently considered as the industry standard.
Get the Best Quality Solar Regulator from SolarFeeds
As a multiple wholesale vendor eCommerce marketplaces, our website lists a wide range of reputable brands of Solar PWM/MPPT Charge Controllers from manufacturers. These charge controllers perfectly work as electronic DC-to-DC converters that optimize the match between the solar array (PV panels), the battery bank, or the utility grid.
The charge controllers convert a higher voltage DC output from solar panels into the lower voltage needed to charge batteries.
You can also buy wholesale multifunction solar charge controllers, which are based on Microcontroller technology. These multifunction solar charge controllers have become popular for their excellent performances. They are used to convert regular UPS/inverters into a Solar power Conditioning Unit (PCU).
Check out our website for various wholesale solar charge controller manufacturers, and buy them in bulk at a low cost.
You can get long-term benefits from buying wholesale solar charge controllers directly from manufacturers for expanding your business and increasing revenues. Drop us an email with your questions at [email protected]