Analysis of Brazil’s solar market
Brazil’s solar market has been growing at a steady pace over the last ten years. As of February 2021, the country’s cumulative installed solar capacity stood at approximately 8 Gigawatts. Nearly six months down the line, the South American nation has hit the 10 Gigawatts of the installed capacity mark. Any solar installer or sector professional can attest that adding 2 Gigawatts in 6 months is a monumental achievement.
Still, approximately 13 Gigawatts of unsubsidized solar projects are currently underway across various regions in Brazil. According to a forecast report by Fitch Solutions, Brazil’s solar capacity is expected to grow by around 23 Gigawatts in the next decade. This strong growth outlook is a clear indicator of vast opportunities in the Brazilian market.
Brazil’s solar equipment production and supply capacity
There are several local and multinational solar equipment manufacturers and suppliers operating within the Brazilian solar market. The most common solar equipment you can expect to find in the Brazilian solar market includes solar panels and solar water heaters. Solarfeeds.com gives you access to leading local and foreign solar equipment suppliers operating within the Brazilian solar market.
Do you need quality, affordable solar equipment? Visit our website’s inquiry page, place a request and you will be good to go. In essence, Solarfeeds.com is a one-stop solution to all your solar equipment needs.
Major ports and logistical support infrastructure in Brazil
The quality of transport infrastructure determines a market’s growth capacity. Well, the quality and scope of Brazil’s logistical infrastructure is something to smile about. The country boasts of several major ports, including Santos port, Santarem port, and Vitoria port. It has an excellent road network and many reputable logistics companies.
Wholesale Solar Charge Controllers Suppliers
Sometimes called “Solar Regulators“, a solar charge controller is basically a device that controls voltage or current that charges the battery so that electric cells do not get overcharged. A charge controller controls the voltage and current coming from the solar panels and move to the electric cell.
Roughly, 12V boards or panels generate around 16 to 20V, and without any regulation, the voltage will damage the electric cells through overcharging. Usually, electric storage devices need nearly 14 to 14.5V to get fully charged. The solar charge controllers are available in different features, sizes, and costs. The range of charge controllers starts from 4.5A, 60 to 80A.
Why Charge Controllers for PV Systems?
- To protect the battery (12V) from overcharging
- To minimize system maintenance and increase the battery life
- To indicate auto-charge
- To monitor the reverse current flow.
Solar power systems mostly use 12V batteries. Solar panels can carry more voltage than required to charge the battery. Charge controllers can keep the voltage of the electronic storage at the optimum level.
This way, solar systems work at their best efficiency level. By running higher voltage in the wires from the solar panels to the charge controller, power transmission through the wires is reduced.
Types of Solar Charge Controllers
There are three main types of solar charge controllers:
- Simple 1 or 2 Controls: This type of charge controller has shunt transistors to control the voltage in one or two steps. The controller regulates the voltage in the solar panel after reaching a certain point.
- Maximum Power Point Tracking (MPPT): The MPPT solar charge controller identifies the best working voltage and amperage of solar panels and matches that with the electric cell bank. The outcome is additional 10-30% more power output than other controllers.
- PWM (Pulse Width Modulated): These are the conventional types of charge controllers and are currently considered as the industry standard.
Get the Best Quality Solar Regulator from SolarFeeds
As a multiple wholesale vendor eCommerce marketplaces, our website lists a wide range of reputable brands of Solar PWM/MPPT Charge Controllers from manufacturers. These charge controllers perfectly work as electronic DC-to-DC converters that optimize the match between the solar array (PV panels), the battery bank, or the utility grid.
The charge controllers convert a higher voltage DC output from solar panels into the lower voltage needed to charge batteries.
You can also buy wholesale multifunction solar charge controllers, which are based on Microcontroller technology. These multifunction solar charge controllers have become popular for their excellent performances. They are used to convert regular UPS/inverters into a Solar power Conditioning Unit (PCU).
Check out our website for various wholesale solar charge controller manufacturers, and buy them in bulk at a low cost.
You can get long-term benefits from buying wholesale solar charge controllers directly from manufacturers for expanding your business and increasing revenues. Drop us an email with your questions at [email protected]