Analysis of Brazil’s solar market
Brazil’s solar market has been growing at a steady pace over the last ten years. As of February 2021, the country’s cumulative installed solar capacity stood at approximately 8 Gigawatts. Nearly six months down the line, the South American nation has hit the 10 Gigawatts of the installed capacity mark. Any solar installer or sector professional can attest that adding 2 Gigawatts in 6 months is a monumental achievement.
Still, approximately 13 Gigawatts of unsubsidized solar projects are currently underway across various regions in Brazil. According to a forecast report by Fitch Solutions, Brazil’s solar capacity is expected to grow by around 23 Gigawatts in the next decade. This strong growth outlook is a clear indicator of vast opportunities in the Brazilian market.
Brazil’s solar equipment production and supply capacity
There are several local and multinational solar equipment manufacturers and suppliers operating within the Brazilian solar market. The most common solar equipment you can expect to find in the Brazilian solar market includes solar panels and solar water heaters. Solarfeeds.com gives you access to leading local and foreign solar equipment suppliers operating within the Brazilian solar market.
Do you need quality, affordable solar equipment? Visit our website’s inquiry page, place a request and you will be good to go. In essence, Solarfeeds.com is a one-stop solution to all your solar equipment needs.
Major ports and logistical support infrastructure in Brazil
The quality of transport infrastructure determines a market’s growth capacity. Well, the quality and scope of Brazil’s logistical infrastructure is something to smile about. The country boasts of several major ports, including Santos port, Santarem port, and Vitoria port. It has an excellent road network and many reputable logistics companies.
If you are planning to get a solar panel system at home, it’s good to understand first the cables and wirings used in solar panel units for your safety. First of all, before you can start generating renewable solar energy, you need wirings and cables to connect all the components of your solar panel system together. The type and size of cables are also important to consider.
For today’s article, we will explain what battery cables are and the different types of solar cables.
What are Battery Cables?
A battery cable is a cable used to power your solar panel system. A solar photovoltaic system will not work without the use of cables and wiring to connect the solar panels to the solar battery and to the other system components. An inter-module cable is used to connect solar PV modules to each other while the controller-to-battery wiring connects the controller to the solar battery or battery bank. The output cables then connect the solar array to a controller or usually an inverter, in the case of off-grid systems.
Typically, battery interconnect cables and battery to inverter cables are necessary for any system with batteries. If you want to make your own battery cables, you need crimping cable & wire tools. In addition to wiring between solar PV modules and solar batteries, and between the solar battery bank and inverter, you are required to use wiring from the combiner box to the battery bank or sometimes known as the home-run.
Solar cable is made up of several insulated wires wrapped with an outer jacket. Solar professionals use them to interconnect solar PV modules to solar batteries, and to other components of a solar power system. They can handle high temperatures, high UV radiation, and have weather resistance features. Typically, these cables are installed outside or within the solar arrays.
When it comes to cable sizes, the diameter depends on the number of conductors it contains. Mostly, the classification of solar cables is based on the number of their wires and gauge. Generally, there are three common types of cables used in a photovoltaic system. These cables are DC solar cables, solar DC main cables, and solar AC connection cables.
Types of Solar Cable
DC solar cables are either module or string cables. These cables are usually single core copper cables with insulation and sheathe. They are used within the solar panels and usually go with suitable connectors. These solar cables are pre-built into the PV modules, so replacement is not recommended.
These solar cables are either single or two-core power collector cables made to connect the positive and negative cables from the generator junction box to the solar power system’s central inverter. Main DC cable comes in a variety of sizes, usually 2mm, 4mm, and 6mm.
- AC connection cable
The AC connection cable is responsible for connecting the inverter to its protection equipment and the electricity grid.
Let us find good suppliers for you
Before you connect those solar cables and wirings you should know what cables you are using and when they should be connected to avoid problems and damage to your solar power system. Understanding all the types and functions of each cable and wire is essential for a safe and code-compliant system.