• Categories
  • 623
    1
    42
    481
    168
    1
    487
    3
    110
    447
    2674
    0
    212
    623
    1
    42
    481
    168
    1
    487
    3
    110
    447
    2674
    0
    212

Top Markets

  • 2
  • 8
  • 2
  • 4
  • 7
  • 5
  • 5
  • 5
  • 3
  • 4
  • 5
  • 2
  • 5
  • 3
  • 3
  • 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 2
  • 4
  • 4
  • 3
  • 2
  • 2
  • 8
  • 2
  • 4
  • 7
  • 5
  • 5
  • 5
  • 3
  • 4
  • 5
  • 2
  • 5
  • 3
  • 3
  • 2
  • 0
  • 0
  • 0
  • 0
  • 0
  • 0
  • 2
  • 4
  • 4
  • 3
  • 2
  • Capacity
  • 1273
  • 736
  • 707
  • 778
  • 1273
  • 736
  • 707
  • 778
    Solar
Didn't find a preferred supplier
  • PV Cable
  • Australia
  • Not available
  • PV Cable
  • Australia
  • Not available

Last Updated Nov 29, 2021

Australia and PV Cable are used below Solar Projects

No Projects Found

Types of PV Cable Suppliers in Australia

Top PV Cable suppliers in Australia

Australia

Australia’s Solar Energy

The utilization of energy created by the heat and light of the sun and converting it into electricity is commonly known as Solar Power Energy. It was in the 1860’s when solar power technologies was first developed, arising from the distress of industrialist that the current coal, oil and fossil fuels supply would become scarce and limited. Thus, becoming more costly for individual households to afford.

The growing concern has then led to the re-evaluation and re-assessment of the international energy policies and regulations. According to the 2018 World Economy Outlook published by the Organization for Economic Co-operation and Development and the International Energy Agency, the global demand for energy increased by 2.1% in 2017 with a 398 GW of solar PV installed around the world, and, meeting the 2% of global electricity demand.

In which, the rate of installations are influenced by changes, alterations and updates in the policy mechanisms supporting such technology. Nonetheless, this trend is expected to significantly increase in numbers by another 25% by the year 2040.

As one of the fastest developing countries, the land down under has relied greatly on solar power energy as their preferred energy source for decades now. However, it was only then in the year 2015 when the age of solar power technology in Australia underwent a rapid growth. The increasing cost of energy resources like fossil fuels, has led to a significant number of households that are turning into solar energy.

The emergence of government funded incentive programs for the incorporation of domestic and commercial solar power utilization also proliferated. Through the years, solar-powered technology has become Australia’s optimal energy source.

Geographically speaking, the Australian continent is known to have the highest solar radiation per square meter of any continent with an average of 58 million petajoules (PJ) of solar radiation per year, which is approximately 10,000 times larger than the country’s total energy consumption. This has helped increase Australia’s Gross Domestic Product (GDP) to $275 million for every petajoule of energy consumed.

To date, there are 2.15 million or 21% of Australian households are recorded to have Solar Photovoltaic (also known as solar PV) with a combined capacity of over 12.9 gigawatts installed on their rooftops that directly converts sunlight into electricity using a semiconductor cell or solar PV cell. This type of solar power technology is the most common and widely used in households.

PV Cable

Wholesale PV Wires & Cables

Solar wires and cables, which are also called solar panel cables and PV wires, refer to wires used to connect solar panels with the photovoltaic system.

Choosing the right wire for solar energy systems is critical for solar users for their smooth functioning and remaining intact. Getting these wires wrong and choose PV wires that are too small for a PV system, the battery bank may not charge fully and as a result, the appliances consumers use, may not work at their full capacity.

Types of Solar Wires and Cables

  • Single metal wire core
  • Multi-stranded conductor type wires

The types of electrical wires or solar panel wires are according to their conductor type. If a wire has a single metal wire core, it is a single-stranded conductor. If it has a multiple wire core, it is a multi-stranded conductor. So, there are basically two wire types.

Difference between a single-stranded conductor and a multi-stranded conductor

The difference between a single-stranded conductor and a multi-stranded conductor is that the use of a single-stranded conductor type wire is common in domestic wiring and works fine for a solar system.

Multi-stranded conductor-type wires perform better in the environments with continuous vibration, such as mobile applications in cars, planes, boats, and trains.

Also, if an area is prone to frequent and extremely high winds, it is ideal to consider multi-stranded conductor wires as they are more flexible and durable.

Sunlight Resistant PV Wire Ratings

Their Amps rate the efficiency of wires and cables for solar systems.

The higher the rating of the current (amps), the thicker the PV wire has to be. If a solar system produces 7 amps, a minimum of 7-amp wire is required. It will be even better to go for a little higher like 9 or 10-amp wire, just to make sure it can handle the current.

If solar users use wires rated at fewer amps than their solar systems produce, the voltage will drop, and the solar panel wire will most likely heat up and eventually may even catch fire causing damage to the solar energy system and to the home.

Solar wires and cables are like plumbing pipes. If too much water pressure (amps) flows through them, they will burst. Therefore, the system would need a bigger pipe (wire) that can handle the pressure (amps) produced by the solar system.

Features of High-quality Wires and Cables:

  • Optimum performance
  • High-tensile strength
  • Low maintenance.
  • Sunlight Resistant

Why Wholesale Solar Wire and Cables from Us

Our website lists wires and cables of reputable brands that offer the best quality range of solar wires and cables. All the wires have a long functional life and uniform thickness.

All current PV wires are fitted with MC4 1500V locking connectors and are compatible with nearly all types of solar panels on the market.

The listed PV wires are flame retardant (flame rated VW-1), moisture resistant, sunlight resistant, and crush resistant.

The solar cables on offer are used to connect solar panels and other solar systems. Besides quality, the manufacturers of these solar cables offer wholesale prices so that you can buy them in bulk quantity. If you want to buy wholesale solar wires and cables at low wholesale prices, then go through our website to explore products for profitable deals. You can also send in your query at [email protected]